The small fix that saves water
Faucet Repair & Installation in Westminster, CO
Fixing drips, low flow and leaks, and installing new fixtures cleanly, with hard water scale factored into the diagnosis.
- Licensed and insured
- Answered around the clock
- Quote before we start
Need this handled today?
Describe what is happening and you will reach a plumber, not a form. Emergencies go ahead of routine work.
- SERVICE
- Faucet Repair & Installation
- WHERE
- Westminster and nearby
- CALL
- (720) 571-0125
A dripping or struggling faucet is easy to ignore and expensive to leave. A steady drip wastes a surprising amount of water over a month, and a faucet leaking at the base can quietly rot a vanity or countertop from underneath. Faucet work covers both the repair of a fixture that is failing and the clean installation of a new one, and on Westminster's hard water it often comes down to scale.
The moderately hard local water leaves mineral deposits in aerators, cartridges and valve seats, which is why faucets here lose flow, drip and stiffen up sooner than the label promises. Knowing that changes the fix, since a clogged aerator and a worn cartridge look similar from the handle but need very different attention.
What your faucet is telling you
- Weak flow from one faucet: usually a scaled aerator, a quick fix
- Steady drip when off: a worn cartridge, washer or valve seat
- Leak at the base of the spout: internal seals, worth repairing promptly
- Water under the sink: a supply connection or the faucet body
- Stiff, grinding handle: mineral buildup in the cartridge
Repairs that hard water makes common
Low flow from a single faucet is most often a scaled aerator, the small screen at the tip, and cleaning or replacing it restores the flow in minutes. A persistent drip is usually a worn cartridge, washer or valve seat, and on hard water those wear faster because mineral grit works at the sealing surfaces every time the handle turns. A leak at the base of the spout points to internal seals that have given out.
The judgment is whether to rebuild or replace the fixture. A quality faucet with a worn cartridge is worth repairing; a cheap fixture that has corroded internally is usually better replaced, because rebuilding it costs nearly as much and does not last. A plumber tells you which yours is instead of automatically selling a new faucet.
Installing a new fixture so it lasts
A clean faucet installation is more than tightening a nut. It means sound supply connections that will not weep, shutoff valves that actually work when you need them, and no cross-threaded fittings that fail a year later. A common upgrade at the same time is replacing tired angle stops and supply lines under the sink, because a new faucet on old, seized shutoffs is a repair waiting to happen.
Kitchen and bathroom installs differ in the details, and a pull-down kitchen faucet or a wall-mount fixture has its own requirements. Getting the rough-in right and the seals correct is what keeps a new fixture from joining the drip list, and it is worth doing properly the first time on hard water that will test every seal.
Check the shutoffs while you are at it
The best moment to replace a seized angle stop is when the sink is already apart for a faucet. Old shutoff valves under a sink often will not fully close after years of hard water, and discovering that during an emergency, when you need to shut one fixture off fast, is the worst time to find out. Swapping tired supply lines and shutoffs alongside a faucet is a small add-on that saves a real headache later.
Questions
Questions Westminster homeowners ask
One faucet has weak flow but the rest are fine. Why?
Almost always a scaled aerator, the small screen at the tip that catches mineral buildup from the hard water. Cleaning or replacing it usually restores the flow quickly.
My faucet drips even when it is off. Is that a washer?
It is usually a worn cartridge, washer or valve seat, and on hard water those wear faster because mineral grit works at the sealing surfaces. It is a straightforward repair on most quality faucets.
Should I repair my faucet or replace it?
A good-quality faucet with a worn cartridge is worth repairing. A cheap fixture that has corroded internally is usually better replaced, since rebuilding it costs nearly as much and does not last. A plumber tells you which yours is.
Can you replace the shutoff valves at the same time?
Yes, and it is a good idea. Old angle stops often will not fully close after years of hard water, so replacing them while the sink is apart saves trouble later when you actually need to shut the fixture off.